
Quick Answer
To restore an Apple silicon Mac in DFU (Device Firmware Update) mode, you need:
- A second Mac running macOS
- A USB-C cable that supports data and charging
- The affected Mac
- A stable internet connection
- Apple Configurator installed on the working Mac
Connect the two Macs, place the affected Mac in DFU mode using a specific key combination, then use Apple Configurator to choose Actions > Restore. A restore erases the affected Mac and reinstalls its firmware and recovery environment, so back up or copy important files first whenever possible.
What DFU Mode Does
DFU mode is a low-level recovery state. It allows a second Mac to communicate with the firmware of an Apple silicon Mac even when the affected Mac cannot start macOS or reach normal recovery tools.
A DFU restore is different from reinstalling macOS:
- Reinstalling macOS generally attempts to preserve your data.
- Reviving firmware repairs firmware and recovery components without intentionally erasing the Mac.
- Restoring the Mac erases the internal storage and reinstalls the required firmware and recovery components.
Use Restore when a revive does not solve the problem, when the Mac has serious startup or firmware corruption, or when Apple Support specifically directs you to restore it.
Warning: A DFU restore erases the affected Mac. It can remove user accounts, apps, settings, and personal files. If the Mac still starts, back it up before continuing. If it does not start, check whether your files are available through iCloud, Time Machine, another backup, or an external drive.
What You Need Before Starting
A second Mac
The working Mac acts as the host computer. It runs Apple Configurator and sends the firmware-recovery commands to the affected Mac.
The two Macs do not need to be the same model. However, the host Mac must be able to install and run the current version of Apple Configurator available for it.
A suitable USB-C cable
Use a USB-C cable that supports data transfer. Some USB-C cables are designed only for charging and will not work.
Avoid relying on:
- A USB-C power cable that is not rated for data
- A USB hub or dock
- A display’s USB-C connection
- A chain of adapters
Connect the cable directly between the two Macs whenever possible. If the affected Mac has multiple USB-C ports, use the port Apple identifies for DFU communication in its model-specific instructions. On many models, the correct port is not simply the nearest one.
Apple Configurator
Install Apple Configurator on the working Mac from the Mac App Store. Apple Configurator is Apple’s utility for managing and restoring certain Apple devices and Mac firmware. You can also review our Apple Configurator 2 instructions for additional background.
Power and network access
Keep both Macs connected to power if possible. The host Mac needs an internet connection to obtain the required firmware and recovery software. Do not close Apple Configurator or disconnect either Mac while the restore is in progress.
Back Up the Affected Mac First
If the affected Mac can still start, use the normal macOS backup method available to you before attempting a restore. A Time Machine backup is useful for recovering your files, settings, and applications after the Mac has been erased.
If macOS will not start but the Mac can reach startup options, try to recover important files before restoring. Depending on the situation, you may be able to:
- Sign in to iCloud on another device and confirm that synchronized files are present
- Restore files from a Time Machine backup
- Connect an external storage device from macOS Recovery
- Ask Apple Support or a qualified repair provider about data recovery
Do not assume that a DFU restore will preserve data. It is an erase operation.
Put an Apple Silicon Mac in DFU Mode
The exact port and keyboard timing can vary by Mac model. The following procedure applies to many Apple silicon Mac laptops and desktops, but consult Apple’s current model-specific instructions if the host Mac does not detect the device.
For a Mac laptop
- Shut down the affected Mac completely. If it is frozen, press and hold its power button until it turns off.
- Connect the USB-C cable directly between the affected Mac and the working Mac.
- Make sure Apple Configurator is installed on the working Mac, but do not start the restore yet.
- On the affected Mac, press and release the power button.
- Immediately press and hold these four keys together:
– Left Control
– Left Option
– Right Shift
– Power - Continue holding all four keys for about 10 seconds.
- Release the three modifier keys while continuing to hold the power button.
- Keep holding the power button for several more seconds, then release it.
The affected Mac’s display may remain blank. That is expected in DFU mode. The working Mac should detect a DFU device in Apple Configurator.
For a Mac desktop
- Shut down the affected Mac.
- Connect it directly to the working Mac with a data-capable USB-C cable.
- Disconnect unnecessary accessories from the affected Mac.
- Hold the affected Mac’s power button while connecting its power to an outlet, if applicable.
- Continue holding the power button until the working Mac detects the device in DFU mode.
Desktop Mac procedures can differ by model and power arrangement. If the device does not appear, verify the correct DFU port and consult model-specific Apple instructions before repeating the process.
Restore the Mac in Apple Configurator
Once the affected Mac appears in Apple Configurator:
- Open Apple Configurator on the working Mac.
- Look for the affected Mac in the device window. It may appear as a DFU device rather than by its normal computer name.
- Select the DFU device.
- Choose Actions from the menu bar.
- Choose Restore.
- Read the warning carefully. Confirm that you understand the internal storage will be erased.
- If prompted, enter the administrator password for the working Mac.
- Allow Apple Configurator to download the required software and restore the affected Mac.
- Keep both Macs connected to power and do not use the USB-C cable during the process.
- Wait for the operation to complete. The affected Mac may restart more than once.
The restore can take time because Apple Configurator may download a large firmware package before transferring it to the affected Mac. A progress indicator may pause temporarily; do not disconnect the cable just because the display does not change immediately.
When the restore finishes, the affected Mac should start to the setup process. You can then select a language, connect to Wi-Fi, sign in with an Apple Account, and restore your data from a backup.
Warning: Do not force the affected Mac to shut down, close Apple Configurator, disconnect the cable, or put the working Mac to sleep during the restore unless Apple Configurator reports that the operation has failed.
Revive Instead of Restore
If you want to repair firmware problems without erasing the Mac, try a Revive operation first when it is available.
In Apple Configurator:
- Select the Mac in DFU mode.
- Choose Actions.
- Choose Advanced.
- Choose Revive Device.
- Follow the onscreen instructions.
A revive updates or repairs firmware and recovery components while attempting to preserve the Mac’s data. It is not guaranteed to fix every startup problem, and you should still maintain a current backup.
If the revive fails or the Mac remains unusable, repeat the DFU process and choose Restore instead. Remember that Restore erases the internal storage.
Troubleshooting DFU Restore Problems
The Mac does not appear in Apple Configurator
Try these steps in order:
- Confirm that the affected Mac is actually shut down before entering DFU mode.
- Disconnect hubs, docks, displays, and other USB accessories.
- Use a different USB-C cable that is known to support data.
- Try another USB-C port on the affected Mac, following the port guidance for that model.
- Restart the working Mac.
- Quit and reopen Apple Configurator.
- Repeat the key sequence carefully, paying attention to the order and timing.
- Make sure the host Mac has internet access and can run Apple Configurator.
A blank screen alone does not confirm DFU mode. The working Mac must detect the device in Apple Configurator.
Apple Configurator reports that the operation failed
A failed operation can result from a bad cable, an unstable network connection, insufficient storage on the host Mac, or an incorrect DFU connection.
Try:
- Reconnecting both Macs directly
- Using another data-capable USB-C cable
- Connecting the host Mac to a reliable network
- Restarting the host Mac and repeating the process
- Checking that the host Mac has enough free storage for the downloaded software
- Trying a different host Mac, if available
If the failure repeats with multiple cables and host Macs, the problem may involve the affected Mac’s hardware or logic board.
The download takes too long or stops
Do not disconnect the Macs immediately. Firmware downloads can take time, especially on a slow or busy network.
If the download clearly fails:
- Check the host Mac’s internet connection.
- Disable a VPN or network filter temporarily if it is interfering with Apple’s services.
- Free storage space on the host Mac.
- Restart Apple Configurator.
- Re-enter DFU mode and try again.
Only change network or security settings if you understand the effect. Restore any setting you temporarily disabled after the operation finishes.
The Mac starts but shows an Activation Lock screen
After restoration, the Mac may ask for the Apple Account previously associated with it. This is Activation Lock, a security feature designed to prevent unauthorized use of a lost or stolen Mac.
Enter the correct Apple Account credentials. If you purchased the Mac used, contact the previous owner and ask them to remove the Mac from their account. A DFU restore does not provide a legitimate way to bypass Activation Lock.
The Mac still will not start after restoration
If the restore completes but the Mac remains unable to start:
- Disconnect all external accessories except power
- Try starting the setup process again
- Confirm that the display and power connections are secure on a desktop Mac
- Try macOS Recovery if it is accessible
- Check whether the Mac shows an error message or diagnostic code
If the Mac repeatedly fails to start after a successful restore, arrange service with Apple or an authorized repair provider. The issue may be hardware-related rather than a firmware problem.
Important Limitations
DFU mode is not a general-purpose file-recovery environment. It does not let you browse the internal drive like a normal desktop, and restoring the Mac should not be treated as a data-recovery method.
A restore also does not remove:
- Activation Lock
- Firmware passwords or organizational management in every situation
- Hardware faults
- Damage caused by liquid, impact, or failed components
For a work or school Mac, contact the organization’s administrator before restoring it. Management enrollment and ownership controls may require administrator action after the restore.
Frequently Asked Questions
Does a DFU restore erase everything?
Yes. Choosing Restore in Apple Configurator erases the affected Mac’s internal storage and reinstalls its firmware and recovery environment. Recover files from a backup afterward.
Can I restore an Apple silicon Mac without another Mac?
Usually, DFU restoration requires a second Mac running Apple Configurator. If the affected Mac can open macOS Recovery, you may be able to reinstall macOS without another Mac, but that is different from a DFU restore.
Can I use any USB-C cable?
No. The cable must support data transfer. A charging-only cable will not establish the required DFU connection.
Is DFU mode the same as macOS Recovery?
No. macOS Recovery is a built-in recovery environment on the Mac. DFU mode is a lower-level state that lets another Mac repair or restore firmware and recovery components.
Should I choose Revive or Restore?
Choose Revive first if you want to attempt a firmware repair without intentionally erasing personal data. Choose Restore when the revive fails or when you are prepared to erase and set up the Mac again.
What if I do not have a backup?
Do not choose Restore until you have considered every available recovery option. Check iCloud, Time Machine, external backups, and professional data-recovery advice. A restore may make local files unavailable.
Final Thoughts
A DFU restore can recover an Apple silicon Mac from serious firmware or startup problems, but it is an advanced erase operation. Use a second Mac, a reliable data-capable USB-C cable, and Apple Configurator. If possible, try Revive before Restore, and always protect your data before beginning.